第1篇 質量工程師（供應商質量管理）工作職責與職位要求
職位描述：
objectives of the position
oby leading the cross functional team within bsc and suppliers， this incumbent should build the process through which the optimum supply base is defined， developed， managed and measured to support the needs of business.
oact as focal contact for supplier quality management system and drive the improvement of supplier performance.
omaintain and improve quality system for cj site
main tasks
owork with internal stakeholders to set the target and review supply assurance， measure supplier delivery performance and service level to bsc periodically.
osupport identified suppliers to achieve better alignment between their company’s plans and activities and bsc’s priorities and objectives.
odocument and put into use supplier quality requirements; assess quality performance and manufacturing process of significant suppliers.
oset differentiated performance targets with all suppliers and documented evidence of results. outcome / progress is formally communicated to suppliers.
owork with other functions as virtual team to conduct the regular quality and crater audit in the area of the supplier of raw materials， operating supplies and equipment with focus on absence of silicone.
oregular performance assessments take place for key suppliers in order to drive continuous improvement in relation to the current and future needs of the business.
odeal with ncm issues， formalize the ncm handling process with internal stakeholders; coordinate the communication process between qc and supplier if there is argument occurred until case closing.
omanage all documentation related to supplier including but not limited to ehs audit report， site assessment report， quality audit report， ncm handling report， delivery performance report， etc.
oidentify， evaluate， improve quality system based on iatf16949. ensure the continuing suitability， adequacy and effectiveness of the qms
oidentify the gaps of quality management system for continuous improvement based on complaint， kpi， internal nc， etc.
minimum education and qualification required for the position
oeducation: university degree in chemicals. professional certification would be a plus.
oworking e_perience: ＞3 years working e_perience in supplier quality management; multinational company working e_perience is preferred
otechnical & professional knowledge:
hands on e_perience on supplier identification， qualification and assessment; e_perience in supplier improvement or mutual development
e_cellent communication and interpersonal skill
fluent language skill both in spoken and written english
ability of working with cross-functional team
knowledge of quality tools (apqp，ppap，msa，spc， fmea)
knowledge of iatf16949 audit ability is highly preferred
第2篇 醫藥研發qa質量工程師（偏管理崗）工作職責與職位要求
職位描述：
職責描述：
職責描述：
1、協助質量經理建設生物醫藥質量體系建設：關注國內外藥品相關的標準、政策等，編寫/修訂sop，體系文件更新，組織文件培訓；
2、協助內部審核：技術方案、原始記錄、報告等記錄審核和現場審查。形成審查記錄/審查報告。通知并跟進不符合項的整改直至關閉；
3、對接外部審核（食藥監局或客戶審核）所需的文件，針對外部審核發現的不符合項討論糾正和預防措施，跟進整改并及時反饋整改進度；
4．負責實驗室人員的管理，包括：技術培訓、實驗技能提升、績效考評；
職位要求：
1、本科及以上學歷，醫藥/化工類專業；
2、精通醫藥gmp質量體系或iso17025質量體系；
3、有質量管理工作2年及以上工作經驗
4、有較強的領導能力，充分激發團隊活力。
薪酬福利待遇】
1、高薪待遇；
2、ihome無息貸款基金（購房無息借款，幫助優秀員工實現上海的“購房夢”）；
3、社保+住房公積金
4.節假日禮品+每年一次體檢+員工拓展旅游（可帶家屬）+搬家補貼+月度員工活動+帶薪年假；
4、做五休二
5、優秀員工推薦獎；
6、豐富的員工培訓課程（周五講壇、周末學院、你點我播）；
7、幫助符合要求的員工落戶上海；
第3篇 高級供應商管理質量工程師工作職責與職位要求
職位描述：
title: sr. supplier quality engineer
location: china
job type: quality / engineering
responsibilities: training and follow-up on apqp- documents (control plan， fmea， process flow…); supplier assessments to improve the deficiencies found during the audit or helped supplier prepare for an oem’s audit or a ts16949 audit; managing and follow-up on new product launch – apqp activities; leading and support of gap closure activities to help supplier close the open issues to meet quality system requirement of customer; managing and monitoring supplier quality performance of production to ensure through-out and delivered quantity & date appropriately.
requirements: commodity e_pertise in either stamping processes and/or machining of cast or forged parts; thorough knowledge of the apqp process and all documents; good problem solving skills with thorough understanding of 8d report， 5 why， spc etc.; quite understanding of iso 9000， qs9000， and ts16949 site audit requirements; willing to travel; integrity， enthusiasm and team-spirit.
skills: english speaking， reading and writing capabilities; good communication skill; ms office (word， e_cel， powerpoint)
education: bachelor‘s degree in engineering or manufacturing
e_perience: quality / engineering with 5 years e_perience at an automotive company， preferably a few years at an international jv or wofe.
